🚨 24/7 Emergency Gas Engineers Available Across East London 📞 07724566154
24/7 Emergency Available

No Hot Water But Heating Works? Here's Why

If your radiators heat up but you've got no hot water, the cause is often a specific boiler component. Here's what's likely wrong.

Gas Safe Registered · 587401 Manufacturer Approved Fully Insured Same-Day Service Local Engineers Upfront cost — no obligation

Need an Emergency Gas Engineer?

Fast local response available across East London

Call 07724566154

It’s a common and frustrating problem: your heating works fine, but there’s no hot water from the taps. Because heating and hot water share some components but not others, this particular combination usually points to a specific fault. This guide explains the likely causes and what to do — most need a Gas Safe registered engineer to put right.

The most likely

The most likely cause: the diverter valve

In a combi boiler, a diverter valve directs heated water either to your radiators or to your hot taps. When it sticks or fails, it often defaults to the heating circuit — so your radiators get hot but no hot water reaches the taps. A faulty diverter valve is the most common reason for “heating yes, hot water no,” and replacing it is a job for a Gas Safe engineer.

Key point

In a combi boiler, a diverter valve directs heated water either to your radiators or to your hot taps.

Other possible causes

Other possible causes

Other culprits include a faulty hot water temperature sensor, an airlock or flow issue in the hot water side, or, in systems with a hot water cylinder, a problem with the cylinder’s components or controls. The pattern of the fault — combi versus stored hot water — helps an engineer narrow it down quickly.

Key point

Other culprits include a faulty hot water temperature sensor, an airlock or flow issue in the hot water side, or, in systems with a hot water cylinder, a…

What you can

What you can check first

Before calling, check the obvious: that the boiler isn’t in a “heating only” mode, that the hot water setting hasn’t been turned down or off on the boiler or controls, and that other taps are also affected (ruling out a single tap problem). If the settings are correct and there’s still no hot water anywhere, it’s time for an engineer.

Key point

Before calling, check the obvious: that the boiler isn’t in a “heating only” mode, that the hot water setting hasn’t been turned…

We restore hot

We restore hot water across East London

Gas First fixes hot water faults throughout East London and Essex — most often a diverter valve, which we frequently carry on the van for a same-visit repair. Call us and let us know it’s a “heating works, no hot water” problem so we arrive prepared.

Key point

Gas First fixes hot water faults throughout East London and Essex — most often a diverter valve, which we frequently carry on the van for a same-visit…

Frequently Asked Questions

Why do I have heating but no hot water?

In a combi boiler this is most often a faulty diverter valve, which directs water between heating and hot water and can stick on the heating circuit.

What is a diverter valve?

It's the component in a combi boiler that switches heated water between your radiators and your hot taps. When it fails, hot water to the taps is commonly lost.

Can I fix the hot water problem myself?

You can check the boiler's hot water settings and that all taps are affected. Replacing a diverter valve or sensor must be done by a Gas Safe engineer.

Can you repair it on the first visit?

Often yes — a faulty diverter valve is common and we frequently carry the part, so a same-visit repair is likely.

Is it urgent?

It's not dangerous, but you'll have no hot water until it's fixed, so most people want it sorted quickly. We aim to attend the same day.

What Our Customers Say

★★★★★

Rated 5 stars by homeowners and landlords across East London

★★★★★

“Taps fitted and boiler service, reasonable pricing.”

Lena Uddin | Romford, Essex

★★★★★

“Annual gas certificates for years.”

Maryllis Gonzalez | Barking, East London

★★★★★

“Cooker installation, gas safety check and boiler check.”

Azizul Chowdhury | Dagenham, Essex

Get a Free Quote

Fill in the form and we'll call you back as soon as possible

Quick Booking

📞 We'll call you back

🔒 Safe | ⚡ Fast | ✅ No obligation

Why Choose Gas First Ltd?

Professional, reliable, and certified gas engineering services across East London

Gas Safe Registered

All work carried out by fully certified Gas Safe engineers

Fast Emergency Response

Quick attendance for urgent gas & heating issues across East London

Transparent Pricing

Fair quotes with no hidden charges — you know the cost upfront

5-Star Customer Service

Rated highly by homeowners & landlords across East London

Experienced Local Engineers

Skilled team covering all East London boroughs

Domestic & Commercial

Services for homes, rentals, and businesses

Boiler Brands We Work With

We repair, service, and install all major boiler brands including:

Areas We Cover

We provide gas, boiler, and plumbing services across East London and nearby areas.

Need a Reliable Gas Engineer in East London?

Contact Gas First Ltd today for fast, professional gas, boiler, and plumbing services across East London.

Call Now WhatsApp